The Thunder Tech Short Course PRO-2wd Was the hit of the 2008 I-HOBBY EXPO!

DON'T BE FOOLED BY CHEAP IMITATIONS!!!

THIS IS NOT JUST ANOTHER BUGGY CHASSIS WITH A COOL LOOKING BODY DESIGNED TO TRICK YOU INTO THINKING THAT IT IS SOMETHING IT'S NOT!!

  THIS IS THE ONLY!! "TRUE TO SCALE" SHORT COURSE OFF-ROAD RACE TRUCK WITH A STRAIGHT REAR AXLE.

The Thunder Tech SHORT COURSE PRO-2wd was designed to be "The Most Accurate Rendition of a Short Course / Off-Road Race Truck to ever be offered to the World of R/C Racing".

We didn't use smoke & mirrors to camouflage an old outdated, entry level toy . Instead, we poured 2 years of hard work, research & development into this project & the result was Thunder Tech's New SHORT COURSE PRO-2wd "The Most Realistic 10th Scale Off-Road R/C Race Truck, Ever!!!"

Been thinking about getting one?

All Orders will be filled in the order that they are received & subject to availability of kits from each production run. Demand has been high & even with continuous production runs, back orders will be inevitable at first. We advise ordering as soon as possible to avoid waiting longer then necessary.

ACT NOW!

   Dealer orders for the SHORT COURSE PRO-2wd are now being accepted. Call in for details.

 Part # CORR-2

Introductory price: $385.00 

This Kit Includes the Following:

G-10 Fiberglass chassis

2wd, Straight rear axle, (Tamiya cross country / Pajero)

Mid mounted motor & drive train.

13.85:1 final drive ratio using 84T spur & 22T pinion (48 pitch) 

 Enclosed gearbox & spur gear cover.

 Independent front suspension. (features parts from RPM RC Products) 

4-link rear suspension with molded lower arms.

Realistic frame and roll cage.

Front and rear sway bars.

Oil filled shocks

Custom Pro-2wd style Off-Road racing body with Interior plate / Driver figure / front & rear fire walls / rear cowl cover

Decal package for the body / interior / front & rear fire walls / rear cowl & chassis side plates

Off-road Bead lock wheels 

Off-road Tires (Tamiya High Lift)

  Impact resistant front & rear bumpers 

Front skid plate

Radio tray tub

Wheelbase= 12" (305mm)

Track / Width= 9" (230mm)

Height= 6 1/2" (165mm)

Total length bumper to bumper= 21" (533mm)

Weight dressed to run= 4.5# (2 kg)

Can use 6 or 7cell flat or 8 cell hump packs.

Ofna heavy duty servo saver.

NOTE: (Motor or electronics are not included with this kit)

The RIPPER-Pro offers a lot of new design changes. most notably, the RIPPER-Pro is the first Clodbuster Chassis kit ever offered that has a "Convertible Wheelbase" that can be reconfigured in a matter of minutes to offer 4 different choices for wheel-bases.

(1) Long - 13.5"

(2) Short - 11.5"

(3) - Intermediate - 12.5" weight bias to the Front

(4) - Intermediate - 12.5" weight bias to the Rear

And if that isn't enough to make it better than the original Ripper, it will also come with our famous Eliminator Steering System as standard equipment.

We have also re-designed our Rear Steering Lock-out in order to make it lighter & less prone to flex of the steering knuckles.

The positive feedback from both our sponsored drivers & customers, has been overwhelming & that leaves no doubt in our minds, that we did our job at Thunder Tech Racing.

This is the newest Clodbuster chassis upgrade kit from the minds at Thunder Tech Racing. This kit was designed as a dual sport chassis, both Racers & Rock Crawlers will find it to be just what the Doctor ordered.

One pair of MIP manufactured Center Drive Shafts for the Tamiya High Lift or Hilux. Also works for the Axial AX-10 (with R2 Dig Unit)

In this kit you get:

2 Short Center Drive Shaft assemblys that telescope from 3.50" to 4.375" long.

One pair of MIP manufactured Center Drive Shafts for the Tamiya TXT-1. Can also work for Wheelie Kings (with stretched wheelbases)

In this kit you get:

2 Long Center Drive Shaft assemblys that telescope from 4.25" to 5.25" long.

One pair of MIP manufactured Center Drive Shafts for the Kyosho Twin Force & Mad Force

In this kit you get:

2 Long Center Drive Shaft assemblys that telescope from 4.25" to 5.25" long.

One pair of MIP manufactured Center Drive Shafts for the Axial AX-10 (with VF Dig Unit)

In this kit you get:

1 Long Center Drive Shaft assembly (Stock Length) that telescopes from 4.25" to 5.25" long. And, 1 Short Center Drive Shaft assembly (For use on the Dig Unit side) that telescopes from 3.50" to 4.375" long.

Adds (1-3/16" total width) to any TLT-1. This kit can be used to widen most other 12mm hex drive applications with a 4mm thread axle.

One pair of Thunder Tech Racing's NEW CVD's for the Clodbuster / Super Clodbuster / Bull Head. These are made exclusively for Thunder Tech Racing by MIP & will cary a limited Lifetime Warranty.

Due to lack of interest, this product will be discontinued once stock has been depleted. We are liquidating all available stock on this item.

Thunder Tech Racing's Improved Ball Differential Unit for the Clodbuster / Super Clodbuster & Bull Head. These are made exclusively for Thunder Tech Racing by MIP & will cary a limited Lifetime Warranty

One pair of Thunder Tech Racing's NEW CVD's for the TXT-1 & Juggernaut 1 or 2. These are made exclusively for Thunder Tech Racing by MIP & cary a limited Lifetime Warranty.